No sound from your karaoke software? Here's what to check
The lyrics are rolling, the singer's ready, and nothing comes out of the speakers. It's almost always one of a handful of things. Start at the software and work your way out to the speakers, and you'll usually find it in a couple of minutes.
▶ Prefer to watch? Watch KJ Forge Host in action: a step-by-step video setting up QR code sign-ups that land right in Host. Or browse all the KJ Forge video tutorials.
1. Check the obvious first
- Mute and volume in your karaoke software. It's easy to hit Mute between singers and forget.
- The volume on the track itself. Some players remember a low volume from the last song or the last show.
- Try a second song. If one file is silent and others play fine, the problem is that file, not your setup.
2. Make sure the sound is going where you want it
Most "no sound" problems at a show are really "the sound is going somewhere else." A laptop can have several outputs at once: its own speakers, the headphone jack, a USB mixer, and the TV. Your karaoke software has to be pointed at the one your mixer is connected to.
Most KJs connect to the mixer one of two ways:
A USB mixer (or USB audio interface)
- Many mixers have a built-in sound card. Over USB it shows up in Windows under the mixer's name, or as something generic like "USB Audio CODEC".
- Plug the mixer in and turn it on before you open your karaoke software, so the software can see it. Then pick it as the output.
- If the cable gets bumped and the mixer drops off, unplug it, plug it back in, and pick it again in your settings.
- On the mixer, make sure the USB return channel is up and routed to the main mix. On many mixers it has its own fader or "USB" button.
An aux cable from the headphone jack
- This plays through the laptop's built-in sound card, which usually shows up as "Speakers" or "Headphones" (often with Realtek in the name). Pick that as the output.
- Use a stereo cable into a line or stereo channel on the mixer, not a mic input. A mic input is too sensitive and will sound distorted.
- Turn the laptop's own volume most of the way up and control the level from the mixer. A laptop at 20% volume makes the signal weak and noisy.
- If you hear a hum or buzz that changes when the charger is plugged in, that's a ground loop. A ground loop isolator on the aux cable usually fixes it.
Watch out for the TV. When a TV is connected over HDMI, Windows can treat it as a speaker and quietly send the audio there. If the sound is coming out of the TV, or nowhere at all, check the output first.
3. Set your mixer as the Windows default sound device
Some programs play through whatever Windows has set as the default output. If that's the laptop speakers or the TV, that's where your sound goes. Setting your USB mixer, or the headphone jack your aux cable is in, as the default fixes it.
Windows 11
- Click the speaker icon by the clock.
- Click the small arrow (>) at the right end of the volume slider.
- Pick your mixer (for example "USB Audio CODEC") or "Speakers / Headphones" for an aux cable.
Or go to Settings > System > Sound and choose it under "Choose where to play sound".
Windows 10
- Click the speaker icon by the clock.
- Click the device name at the top of the volume popup.
- Pick your mixer or "Speakers / Headphones" from the list.
Any version: the classic Sound window
- Press Windows key + R, type mmsys.cpl and press Enter.
- On the Playback tab, click your mixer or headphone output, then click Set Default.
- Play a song. The green bars next to the device should move.
If your karaoke software has its own output setting, set it there too. A program set to a specific device keeps using it no matter what the Windows default is.
4. Check the Windows volume mixer
Windows keeps a separate volume for every app. Open the volume mixer from the speaker icon by the clock and make sure your karaoke software isn't turned down or muted there, even if the main volume is up.
5. Another program may be holding the sound card
If karaoke goes silent only when another music program is open, that program has probably locked the device. Audio drivers like ASIO and Windows' exclusive mode can take the whole sound card for one app, so nothing else can play through it.
- In the other program's audio settings, switch to WASAPI (shared), not ASIO, on the same device.
- Or give karaoke its own output: a second output on your interface, or a cheap USB sound card into its own mixer channel. That also gives you a separate fader for karaoke.
- In the classic Sound window (mmsys.cpl), open your output's Properties, go to Advanced, and turn off "Allow applications to take exclusive control of this device."
6. Then the cables and the mixer
- Follow the cable from the laptop to the mixer. Is it in the right jack, and is that channel's fader and gain up?
- Check the channel isn't muted, and that it's routed to the main mix.
- Swap in a known-good cable before you blame anything else.
In KJ Forge Host: Settings, then the Audio tab, sets where karaoke plays ("Karaoke audio goes to") and where the soundboard plays ("Soundboard & memes go to"). It always uses Windows' shared audio mode, so it can play through the same device as your other music programs. Changes apply when you click Save.
Try KJ Forge Host free for 14 days
Karaoke hosting software for Windows, built by a working KJ: forgiving search, singer rotation, saved keys, a singer display and a soundboard. Every feature, no credit card.
Questions
Why is my karaoke video playing with no sound?
Usually the audio is going to a different device than your mixer (often the TV over HDMI), the app is muted in the Windows volume mixer, or another program has locked the sound card. Work through the checklist from the software out to the speakers.
Can two music programs use the same sound card at once?
Yes, as long as both use Windows' shared audio mode. A program using ASIO or exclusive mode can lock the device so nothing else can play through it. Switch that program to WASAPI shared mode, or give each program its own output.
Why does the sound come out of the TV instead of my speakers?
When a TV is connected over HDMI, Windows can treat it as a speaker. Pick your mixer or audio interface as the output device in your karaoke software instead of the HDMI device.
Should I use a USB mixer or an aux cable for karaoke?
Both work. A USB mixer with a built-in sound card is usually cleaner and avoids ground hum. An aux cable from the headphone jack is simpler; plug it into a line or stereo channel, turn the laptop volume most of the way up, and control the level from the mixer.
How do I change the default sound device in Windows?
Click the speaker icon by the clock and pick your device from the list (in Windows 11, click the arrow next to the volume slider first). Or press Windows key + R, type mmsys.cpl, select your device on the Playback tab and click Set Default.
